Battery-Materials Analysis & Evaluation
Examples of Supported Analyses and Evaluations
- "Non-exposure-to-atmosphere processing - cross-section TEM observation" for structural change of the positive electrode before and after charge-discharge test
- Non-destructive internal defect observation of a square-type battery for mobile phones
- "XPS" for analyzing the dendrite state of lithium (Li) on the negative electrode surface in overcharge state
- "FIB processing "for SEM/for TEM" without exposure to atmosphere
- Argon ion milling (CP) without exposure to atmosphere "for SEM, supporting transfer vessel"
- Microstructure analysis without exposure to atmosphere (high-resolution FE-SEM/EDX, FE-TEM/EDX/EELS)
- Surface state analysis without exposure to atmosphere "XPS, AES"
- "Phase transition, crystal plane distance, crystallinity evaluation" for structural analysis of the electrode based on in-situ XRD
- Electrode surface observation using an in-situ CCD camera
- High-resolution SEM-STEM observation of Pt (platinum) catalyst/C carrier
- Structural observation of Li-ion (lithium-ion) battery Cu electrode material
- TEM observation of Li-ion (lithium-ion) battery negative electrode material
- Evaluation of orientation of Cu (copper) plating film based on EBSP
- Example of evaluating orientation of Cu (copper) plating film, comparison between EBSP figure and SIM image
- Analysis of impurities in battery material "positive electrode material, negative electrode material, electrolyte"
- Measurement of grain size distribution of electrode material based on the laser diffraction method
- High accuracy infrared camera
- Disassembly of a deteriorated battery in an environment without exposure to atmosphere
- Analysis of functional groups on the negative electrode surface
- Analysis of state of lithium peroxide
- Observation of state of active material-electrolyte interface of an all solid battery
- Experimental production of a laminate battery and a coin battery and performance test for charge-discharge characteristic
- Surface observation "FE-SEM, AFM" of separator material for a Li-ion (lithium-ion) battery
- "High-speed camera shooting" for battery drop test
- Compression test/high-speed deformation characteristic evaluation of a battery case
- Measurement of temperature distribution in a fuel battery cell
- Microstructure analysis of a current collector weld
- Analysis of crystal orientation of a current collector thin film
- Structural analysis of the laminated cross section of a CIS solar cell
- Structural analysis of an InGaAs solar cell
- Defect observation of a GaAs solar cell based on TEM
- Microstructure analysis of a dye-sensitized solar cell and an organic thin film solar cell
- Observation of the surface shape of the separator for a long-used fuel battery
- Salt spray test and combined cycle test of a solar cell panel
- Evaluation of a weld of fixing hardware for solar cells
- Evaluation of corrosion resistance of a gas generator case
- Infinitesimal analysis for "polycrystalline Si (silicon)"
- Impurity analysis based on laser ICP/MS
- ULV-SEM observation of Pt catalyst for PEFC fuel battery
- TEM observation of Pt catalyst for PEFC fuel battery
- XPS analysis of Pt catalyst for PEFC fuel battery "core level, valence"
- Analysis of element distribution of button battery positive electrode material (MnO2) (mapping analysis and line analysis)